Shandong Nicole Technology Co., Ltd.
Details For Quality, Nicole For Details.
Add to Cart
Factory Price Pallet System Sterilization Vacuum Microwave Dryer
Application Range
Microwave vacuum drying equipment has obvious advantages in extending the shelf life of food, preserving the original flavor and nutritional components of food, retaining the physiological activity of raw materials, enhancing the functionality of health food, and improving the added value of agricultural and sideline products.
It can effectively keep the shape, color, nutrient composition and aroma of the material unchanged.
These characteristics are particularly important for the production of health care products; but it can greatly save energy. It is especially suitable for dehydration and drying of high value-added and heat-sensitive agricultural and sideline products, Chinese medicinal materials, health products, food, fruits and vegetables, chemical raw materials, etc.; low-temperature concentration of chemical products, removal of crystal water, drying of enzyme preparations, etc.; and Vacuum extraction of Chinese herbal medicine; laboratories of scientific research institutions, etc.
Advantages of Pallet System Sterilization Vacuum Microwave Dryer:
Microwave vacuum drying is a new combined drying technology developed with microwave drying technology. It not only has the advantages of fast drying speed, low temperature, low material temperature, good color, flavor and nutritional content retention, but also the parameters can be controlled, which can dry a variety of different types of materials.
Microwave vacuum drying rate is high. Common drying methods such as hot air drying, for the material, heat is transferred from the surface to the inside, while the moisture migrates from the inside to the outside, and the temperature gradient is opposite to the direction of the moisture transfer, which will lead to a decrease in the drying rate.
Microwave drying is to directly apply energy to the entire material through microwaves, so that the material as a whole is heated evenly, which greatly shortens the heating time; at the same time, due to the existence of pressure migration power, microwave drying has the characteristics of drying from the inside to the outside, which overcomes the need for conventional drying. Due to the fact that the outer layer of the material is first dried to form a hard shell, which prevents the internal moisture from continuing to move out, the drying rate is high.
Microwave heating is uniform heating inside and outside the material at the same time. The place with high water content absorbs more radiant energy, and the dry matter is relatively small, which can be dried more quickly, which plays the role of automatic balance of heat distribution; at the same time, vacuum drying can reduce the amount of water. The high evaporation temperature makes the material evaporate quickly at a lower temperature, avoiding the burns, coking, crusting and hardening caused by simple microwave heating due to overheating, and at the same time avoiding oxidation, thus improving the drying quality. Especially in the case of heat-sensitive materials in the fields of medicine, food and chemical industry, low temperature and rapid drying conditions are required; at the same time, for food and medicine, due to the biological effect of microwaves, the purpose of sterilization can be achieved at a lower temperature.
Equipment system components:
1.The microwave heating chamber
2.Microwave heating system
3.Vacuum system
4. Safety system
5. Control system
Technical Specifications
| Models | Microwave Input | Microwave Output | Dehydrated | Sterilization |
| NT-12 | 18kw | 12kw | 12kg/hr | 100-150kg/hr |
| NT-15 | 20kw | 15kw | 15kg/hr | 120-180 kg/hr |
| NT-20 | 26kw | 20kw | 20kg/hr | 180-250 kg/hr |
| NT-30 | 36kw | 30kw | 30kg/hr | 280-350 kg/hr |
| NT-40 | 46kw | 40kw | 40kg/hr | 380-450 kg/hr |
| NT-50 | 58kw | 50kw | 50kg/hr | 480-550 kg/hr |
| NT-60 | 68kw | 60kw | 60kg/hr | 500-600 kg/hr |
| NT-70 | 78kw | 70kw | 70kg/hr | 700-800 kg/hr |
| NT-80 | 90kw | 80kw | 80kg/hr | 800-900 kg/hr |
| NT-100 | 110kw | 100kw | 100kg/hr | 1000-1200kg/hr |
Equipment production steps
Payment terms:
T/T, L/C or other formal import and export payment method
Packing and Shipping:
1. Plastic film as inner packaging
2. Formal export packaging or packaging according to customer requirements
3. Shipping by sea, land or rail.
Choose the best shipping method according to the actual situation or customer requirements
FAQ
Q: How long is your production cycle?
A: Usually 7-25 working days, depending on the quantity.
Q: Can you help design the entire process line?
A: Of course, our experienced engineers and technicians can help you arrange the layout and installation of the entire production line according to the actual situation such as your workshop layout.
Q: How to install?
A: Due to the epidemic, we can currently provide online guidance services by experienced engineers.
Q: How is the payment:
A: T/T, L/C or other formal import and export payment method
Q: How long is your warranty period?
A: One year after commissioning is completed.
Q: Will you help us if we have any problems in future production?
A: It is necessary, you can contact me through mobile phone, WhatsApp, etc. We are always at your service. We will help resolve your issue as soon as possible.